StandAlone LED lamps are an 18W direct replacement for fluorescent lamps. controlLED Lites are 18W dimmable linear LED tubes that also replace fluorescent lamps and use a dimmable driver (LD100-SC1) which replaces the existing ballast. The Master LD100-SC1 driver can be controlled by Toggle Dimming using the existing light switch, a 0-10VDC signal from any source, such as Building Automation System or an RS485 signal (we provide protocol). Toggling the existing light switch allows the user to select 100%, 50% or 30% light levels. Additional fixtures in the same room are dimmed simultaneously by satellite LD100 drivers on each fixture connected via twisted pair.
This is an ideal lighting retrofit as dimmable LED Lites can save in excess of 70 percent of the lighting bill, will last more than 50,000 hours and install with minimal wiring. Dimmable LED Lites will be released for purchase in June 2012.